这是描述信息
Position:
Homepage
>
>
>
>
HDG100 Series Single Seat Regulating Valve
Number of views:
1000

HDG100 Series Single Seat Regulating Valve

  
Categroy: Control Valve 
HDG100 series single seat regulating valve is top-guided structure. The valve body of this series has simple structure, smaller size and S fluid path, with wide regulating range, high accuracy of flow characteristic curve, largeguiding area of plugs and good anti-vibration, which makes it possible to be suitable for a variety of severe working conditions; This series of regulating valve can be available of belowstype, extended bonnet type, high temperature and steam javket type.
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
1
Product description

Technical Data and Features

Valve Body:

Type: Unbalanced

Nominal Diameter: 15~600mm(1/2" ~ 24")

Plug Type: Plunger

Flow Characteristics: Equal percentage, linear, Quick opening

Nominal Pressure: PN16 ~ 25MPa

                               ANSI Class 150LB ~ 1500LB;

Connection Type: Flange(RF、RTJ、FM)

                              Threaded

                              Welding(SW、BW)

Flange Standard: ASME B16.5

                             DIN EN 1092-1

                             GB/T 9113

                             HG/T 20615

                             HG/T 20592

Face to Face: ANSI/ ISA 75.03、ASME B16.10、DIN3202、GB/T 12221 etc.

Body and Bonnet Material: WCB、LCB、WC6、CF8M、CF3M、C12、ALLOY20、MONEL、Hastelloy C ,etc.

Trim Material: 316SS、316L SS、416SS、440C、

                       ALLOY20、MONEL、Hastelloy C,etc.

                        Above+R.TFE(Reinforced PTFE)

                        Above + Stellite (Hard faced)

Upper Bonnet Type: Standard type -29~250℃

                                  High temperature extended type 250~565℃

                                  Low temperature type -196~250℃

                                  Steam jacket insulation type

                                  Bellows seal type

Structure: Top-guided single-seat regulating valve

Packing: PTFE V-packing

              Graphite packing etc.

Others: If the valve flash, it is recommended to choose a reduced-bore type, and the plug and seat are hard faced.

Actuator part:

Item
Type
Pneumatic diaphragm type Pneumatic piston type Full electronic Electric Full electronic(temperature-regulated actuator
Task Regulating/On-Off Regulating/On-Off Regulating Switch Regulating
Spring range 20-100; 40-200;80-240KPa - - - -
Air source/power 0.14,0.25,0.4MPa 0.4~0.6MPa 220V·AC50Hz 220V·AC50Hz 220V·AC50Hz
380V·AC50Hz 380V·AC50Hz
Connector Rc1/4”, Rc3/8” Rc1/4”, Rc1/2”,Rc3/8” Wiring: 2-G1/2” Wiring: 2-G1/2” M27x2
(Temperature sensor connector)
Connection type of action Air open, air close Air open,air close,double acting Power on, power off Power on, power off Cooling control, heating control
Allowable ambient temperature -40 ~ +80℃ -60 ~ +65℃ -10 ~ +50℃
Optional valve accessories Electric valve positioner, air filter regulator, solenoid valve, limit switch, lock-up valve, manual device Overload unit Inching switch for position detecting, potentiometer -

The main technic data:

Nominal diameter 20 25 32 40 50 65 80 100 125 150 200
Rated Kv Linear 6.9 11 17.6 27.5 44 69 110 176 275 440 690
Equal percentage 6.3 10 16 25 40 63 100 160 250 400 630
Rated stroke L(mm) 16 25 40 60
Diaphragm effective area (pneumatic valve)Ae(cm²) 280 400 600 1000
Inherent flow characteristics Quick opening、linear、EQ%
Inherent regulating ratio 50:1
Allowable leakage Hard seal: CLASS IV、CLASS V; Soft seal: CLASS VI

 

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

PRODUCTS

Message

Description:
imgboxbg
这是描述信息

Contact Us

 

 

KINGSWAY FLOW CONTROL  (CHINA ) CO., LTD.

Room 704, Full Tower, Dongsanhuan Zhong Road No.9, Chaoyang District, Beijing, China

Copyright © 2019 KINGSWAY FLOW CONTROL  (CHINA ) CO., LTD.     皖ICP备2025091263号 Powered by:www.300.cn Hefei SEO

Share:
img
img
img
img
img